How to access equipment within cabinet SPA POOL

28 August, 2024

note: myHotTub access has it's own separate information

Please provide clear access to all side panels and equipment within the cabinet of your spa

Please be mindful of where you position your new spa so you have 600mm clear access to all side panels and equipment within the cabinet. This will be needed for initial installation and also ongoing general maintenance.

 

  

 

How to access your equipment

Undo screws with allen key to remove side door panels

Lift bottom of door, slide downwards & remove carefully / Lean vertically in a secure position to avoid damage

Filtration pump (left) hydrojet boost pump (right)

Power supply to control box / Clearzone unit shown in background

Bleed valve on hydrojet boost pump

Spa blower

 

 

Downloadable tech sheet

Download the 'tech sheet' for your particular spa  model for location of equipment within the cabinet (example below of where you'll find download button once you locate your model through 'spa pools' or 'swim spas' top menu option. 

Below is an example of the tech sheet for myChillout spa pool, showing measurements for pre-installing power in conduit/flex through the concrete slab so it enters under the cabinet at one of these locations shown. You must adhere to these directions to avoid interference with equipment already installed within the cabinet which may delay delivery date.

×